How to Regulate The Use of Welding Cables ?

What should be paid attention to when using welding cables?
1. During the equipment manufacturing process, the machined surfaces, heat exchange tube surfaces, internal surfaces in contact with corrosive media, flange sealing surfaces, etc. shall not be clamped with earth cables to prevent arc damage.
2. The welding position and the wiring position adopt the principle of being close to each other, and the two wires are in place.
3. Metal components or structural steel bars shall not be used to replace the ground wire of the secondary wire.
4. Welding cables and earth cables joints are not allowed to be wound, they must be pressed tightly with special joints or copper wire noses before use
5. It is forbidden for multiple welding machines to share one ground wire lap point to prevent random connection of ground wires.

Details
1. During the equipment manufacturing process, the machined surfaces, heat exchange tube surfaces, internal surfaces in contact with corrosive media, flange sealing surfaces, etc. shall not be clamped with ground wires to prevent arc damage.
2. The welding position and the wiring position adopt the principle of being close to each other, and the two wires are in place, and it is strictly forbidden to connect in different places
3. Metal components or structural steel bars shall not be used to replace the ground wire of the secondary wire
4. Welding wire and ground wire joints are not allowed to be wound, they must be pressed tightly with special joints or copper wire noses before use
5. It is forbidden for multiple welding machines to share a ground wire lap joint to prevent the ground wire from being connected randomly.
6. The welding tongs and the welding cables are connected reliably, the clamping force is good, the welding rod can be clamped at any inclination, the insulation is reliable, and there is no overheating.
7. When welding simplified circular seams by submerged arc welding, a rotatable ground wire clamp is used to avoid distortion of the welding cables
8. The ground wire clip produced by the cutting station is uniformly used. The specification, model and material of the ground wire clip shall not be changed at will. In special circumstances, a written application must be filled in and filed in the business department
9. The quick connector is in good contact with the welding machine, and there is no virtual connection.
10. The ground wire clamp is connected firmly and reliably to the parts to be welded, and shall not overlap randomly.

JZD cable is a 20-year wire and cable manufacturer in Shenzhen, China, providing welding cables, earth cables, and various types of wires and cables.