JZD Wire And Cable Fire Prevention Measures

Catching fire in cables and wires can easily cause large fires with very serious consequences. Here are some preventive measures.

1. Clean the dust on the cable regularly to prevent the dust from spontaneously igniting and causing the cable to catch fire.
 

2. Test the cable regularly. Once any abnormality is discovered, promptly find out where the problem occurred.
 

3. Ensure the quality of cable construction. What needs special attention here is the manufacturing of cable connectors. When manufacturing cables, they must be manufactured in accordance with relevant regulations.
 

4. Keep the cable trench dry. Prevent the cable from getting wet, which affects the cable's insulation. Poor cable insulation can easily cause short circuits.
 

5. Strengthen cable monitoring after the cable is put into use. In this way, if the cable is overloaded, it can be discovered in time to avoid long-term overloading of the cable.

During normal operation of the cable, if a fault such as breakdown occurs for some reason, the accumulated water in the cable trench will enter the cable along the fault point; in civil engineering construction, especially at construction sites using large construction machinery, various artificial Cable breakage or breakdown accidents caused by factors are also common. When this kind of accident occurs, the cable insulation is seriously damaged, which can also cause water to enter the cable. Hope the above knowledge can help you.

JZD wire and cable manufacturer specializes in the production of pv cable 6mm2, 2.5mm2 thhn wire and cable, 150mm2 thhn wire, thhn building cable, 1.5×10 core flexible cable, etc. If you want to know about related products, please feel free to contact us.