What are the advantages of solar photovoltaic cables?

Many friends will have a question, that is how to install the solar photovoltaic cable and link the inverter of the photovoltaic cable.

We are all curious how this is done. In fact, I am also curious about how the solar photovoltaic cable converts the current and how to transmit the current to the solar photovoltaic panel.

First, let's talk about how to connect the solar photovoltaic cable and the inverter together.

You can refer to the steps of the Growatt inverter wiring method to operate:

The beginning is the preparation work before wiring. Before electrical connection of the photovoltaic inverter, make sure that the DC switch of the inverter is in the "OFF" state, and disconnect the AC side air switch. Otherwise, the high voltage of the inverter may cause danger to the operator's life.

Then there is each inverter to be installed independently - an AC circuit breaker. It is forbidden to share with multiple inverters. It is forbidden to connect the load between the inverter and the circuit breaker. It is forbidden to use single-core wire at the inverter output.

It should be noted that the protective ground wire PE needs to be connected, and the protective ground wire PE should be connected at one point, and the inverter and the grounding bar should be connected through the protective ground wire PE to achieve the purpose of grounding protection.

It should also be noted that if the wire is relatively thick and the weight is relatively large, it is necessary to ensure that the output wire is well connected before turning on the inverter.