Single Core Solar Cable

10 AWG Solar Panel Wire TUV Certificated

JZD cable provides photovoltaic solar cable 16MM2 10MM2 6MM2 4MM2

Product Decription
  • Brand : JZD cable
  • Operating Voltage : DC 0.6/1kv
  • Place of Origin : Shenzhen, China
  • Model : PV1-F
  • Colors : red and black
Inquiry Now
Product Details

 

INTRODUCTION

Our 10 AWG Solar Panel Wire is mainly used for interconnection wiring of grounded and ungrounded photovoltaic power systems and solar panel at home. This 10 AWG Solar Panel Wire is for applications up to 0.6-1kv, the highest temperatures could reach at +90°C and our 10 AWG Solar Panel Wire has certificated by TUV and hot saled in many countries, like france, britain, australia, USA, cause we notice the quality control very much during this 10 AWG Solar Panel Wire production, we regard this 10 AWG Solar Panel Wire as our most important product imported into other countries, we want our customer know us by this good quality photovoltaic solar panel and now photovolatic solar panel system is very popular all over the world, we belive you could benefit from our 10 AWG Solar Panel Wire.

PRODUCT DESCRIPTION

Product Photovolatic Solar Panel Single Core Cable
Type PV1-F
Voltage 0.6/1KV
Conductor Finely stranded tinned copper
No. of cores Single core
Insulation > 0.5MM Thick, LSZH / XLPE 
Sheath > 0.5MM Thick,XLPE
Ambient Temperature - 40 ℃ ~ + 90 ℃
The Highest Temperature of Conductor 120 ℃ (allow 5 s in short circuit temperature 200 ℃)
Limited Voltage AC0.6/1kv dc1.8kv
Standard IEC60228

FEATURE
1. LSZH Sheath (Low smoke without halogen), good cold, ultraviolet, ozone - resistant and weather - resistant.
2. Flame retardant, cutting resistance, and penetration resistance.
Cable protection level Ⅱ level.
3. With 150 ℃ photovoltaic cable radiation as insulation materials.
4. It conforms to ROHS, and the insulation resistance is small after immersion.

ELECTRICAL 
1. The dc resistance: the finished cable at 20 ℃ conductive wire core dc resistance is not greater than 5.09 Ω/km
2. The insulation resistance: the finished insulation resistance of cable at 20 ℃ should not less than 1014 Ω. Cm finished cable insulation resistance at 90 ℃ is not less than 1011 Ω. Cm
3. The sheath surface resistance: resistance of the finished cable sheath surface should be not less than 109 Ω.

TYPE

Cross section

Wire struct

Conductor diameter

Outer diameter

Conductor resistance

Rated voltage

Rated current

mm2

No.OD(mm)

mm

mm

Ω/Km

V AC/DC

A

1x2.5mm²

2.5

48x0.25

2.0

5.2

8.06

1000/1800

30

1x4.0mm²

4.0

56x0.30

2.6

6.4

4.97

1000/1800

50

1x6.0mm²

6.0

81x0.30

3.3

7.2

3.52

1000/1800

70

1x10mm²

10

74x0.40

4.4

8.3

2.12

1000/1800

90

2x2.5mm²

2.5

48x0.25

2.0

6.2x9.9

8.06

1000/1800

30

2x4.0mm²

4.0

56x0.30

2.6

6.9x11.30

4.79

1000/1800

50

2x6.0mm²

6.0

81x0.30

3.3

7.1x14.50

3.52

1000/1800

70

 

Write us

Welcome to our company website, thank you for your letter, we will give you a reply in the first time, would you please leave your information and contact way!