• Home
  • Products
  • UL Certified Nylon THHN/THWN-2 Cable Outdoor Conduit Installations 10AWG-500MCM

UL Certified Nylon THHN/THWN-2 Cable Outdoor Conduit Installations 10AWG-500MCM

UL Certified Nylon THHN/THWN-2 Cable Outdoor Conduit Installations 10AWG-500MCM

Standard
UL83 CSA C22.2 NO.75
Voltage
600V
Conductor
Copper
Insulation
PVC
Sheath
Nylon
Max Operating Temp
90℃

Categories ,

UL Nylon THHN Cable​

​JZD Cable’s UV-Stable THHN Cable​​ is engineered for extreme outdoor exposure where standard cables fail. Featuring a ​​sunlight-resistant nylon jacket​​ with UV inhibitors, it withstands prolonged direct sunlight while resisting abrasion, chemicals, and temperature swings. UL-listed for safety and performance in conduits, raceways, and exposed industrial sites.

​Key Specifications:​
✅ ​​UV Resistance:​​ Superior sunlight stability (tested per UL 1581 WA-1)
✅ ​​Temp Range:​​ -40°C to 90°C (Dry Locations)
✅ ​​Conductor:​​ Bare copper (Stranded Class B/C)
✅ ​​Voltage Rating:​​ 600V
✅ ​​Jacket:​​ 20% thicker sunlight-resistant nylon vs. standard THHN
✅ ​​Sizes:​​ 10 AWG to 500 MCM (Bulk coils, cut-to-order)

UL Nylon THHN Cable​ UL Nylon THHN Cable​ UL Nylon THHN Cable​

Specification

THHN/THWN-2 Cable Technical Parameters
Conductor Insulation Thickness
(mils)
Jacket Thickness
(mils)
Nominal O.D.
(mils)
Approx. Net Wt.
Per 1000′ (lbs.)
Allowable Ampacities+
60°C 75°C 90°C
14* 1 15 4 102 15 15 15 15
12* 1 15 4 119 23 20 20 20
10* 1 20 4 150 36 30 30 30
14* 19 15 4 109 16 15 15 15
12* 19 15 4 128 24 20 20 20
10* 19 20 4 161 38 30 30 30
8 19 30 5 213 63 40 50 55
6 19 30 5 249 95 55 65 75
4 19 40 6 318 152 70 85 100
3 19 40 6 346 189 85 100 115
2 19 40 6 378 234 95 115 130
1 19 50 7 435 299 110 130 145
1/0 19 50 7 474 372 125 150 170
2/0 19 50 7 518 462 145 175 195
3/0 19 50 7 568 575 165 200 225
4/0 19 50 7 624 718 195 230 260
250 37 60 8 694 851 215 255 290
300 37 60 8 747 1012 240 285 320
350 37 60 8 797 1174 260 310 350
400 37 60 8 842 1334 280 335 380
500 37 60 8 926 1655 320 380 430
600 61 70 9 1024 1987 350 420 475
750 61 70 9 1126 2464 400 475 535
1000 61 70 9 1275 3257 455 545 615

* Sizes 14, 12, and 10 AWG are available with Technology only in Barrel configurations. Standard put ups vary from the ones shown on this chart for standard 14-10 AWG THHN

+Allowable ampacities shown are for general use as specified by the 2014 Edition of the National Electrical Code Sections 310.15 and 240.4(D)

Unless the equipment is marked for use at higher temperatures the conductor shall be limited to the following per NEC 110.14(C):

  • 60°C – When terminated to equipment for circuits rated 100 amperes or less or marked for 14 – 1 AWG conductors
  • 75°C – When terminated to equipment for circuits rated over 100 amperes or marked for conductors larger than 1 AWG
  • 90°C – THHN dry locations and THWN-2 wet or dry locations for ampacity adjustment purposes using NEC section 310.15

Application

1.​ ​Outdoor Conduit Installations​

• ​​Solar Farms:​​ UV-stable wiring for combiner boxes and tracker systems
• ​​Parking Lot Lighting:​​ Conduit wiring for pole-mounted fixtures
• ​​Bridge/Tunnel Electrification:​​ Exposed conduit runs in coastal/high-UV zones

​2. Industrial Exposed Sites​

• ​​Oil & Gas Plants:​​ Conduits in refinery pipe racks and drilling platforms
• ​​Water Treatment Facilities:​​ Chemical-resistant UV wiring for control conduits

3. ​Infrastructure & Municipal​

• ​​Traffic Signal Systems:​​ Wiring for signal cabinets and overhead mast arms
• ​​Airfield Ground Lighting:​​ Runways/taxiways in high-UV geographies

4. ​​Renewable Energy Integration​

• Wind turbine conduit systems
• EV charging station raceways

Nylon THHN Cable​

JZD Factory

JZD Wire & Cable has been established for over 25 years, We are manufacturing and supplying quality electrical cables to America, Canada, European countries, Philippines. Australia, South American countries, South Africa, ect. JZD Wire & Cable makes customized cables for a complete range in this industry, including single and multi-cores cables, such as : Solar Cable, THHN Nylon Cable, Building wire, Flat TPS Cable, AC Cable, MC Cable, NM-B, NMD90, Fire rated cable, Silicone Cable, ect. High quality products that JZD provided have been taken part in lots of buildings and projects all over the world. Like airports, schools, hospitals, factories, ect.

jzdcable factory

Certification

thhn certificate

Exhibitation

April 2025 Exhibition in Indonesia

April 2025 Exhibition in Indonesia

May 2025 Exhibition in the Philippines

May 2025 Exhibition in the Philippines

FAQ

Q: Are you a manufacturer or trading company?

A:We are a professional manufacturer. We can control your order from the first begining to the last. Welcome to visit us. We’ll pick you up in Shenzhen.
 
Q: How can I get a sample to test your quality?
A:The samples are free for you. New clients are expected to pay for the courier cost.
 
Q:What’s your Minimum Order Quantity?
A:Normally 100m. However, the cable is very heavy. You’d better order a suitable quantity to avoid the high freight. Sea transportation is the best option.
 
Q:Can I get a discount?
A:It depends on your quantity, We can make a discount and afford the freight. Pls kindly contact us.
 
Q:Does your company accept OEM production?
A:Yes, could print your company name, we even custom the quality card to promote your company.

Related products

Send inquiry

Cart
  • Your cart is empty Browse Shop
    Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
    • Image
    • SKU
    • Rating
    • Price
    • Stock
    • Availability
    • Add to cart
    • Description
    • Content
    • Weight
    • Dimensions
    • Additional information
    Click outside to hide the comparison bar
    Compare